"> Sapfire Sapfire Water Mist 3kg
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Sapfire

Sapfire Water Mist 3kg

Sapfire Sapfire Water Mist 3kg — Portable Fire Extinguishers. The supplied category identifies the equipment as Water Mist Extinguisher, and it is normally installed at designated fire points in accommodation, machinery, galley, deck or technical spaces according to the vessel fire-control plan. In that listed role, its primary purpose is to provide immediate first-response firefighting with the extinguishing medium identified by the listed extinguisher type. Dry powder, CO2, foam and water-mist extinguishers suit different fire hazards, so the medium and placement must match the approved vessel fire plan. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity kg 3
fire class A,B
marine approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Loss of charge, pressure or extinguishing medium makes the extinguisher unavailable or undercharged during inspection
Valve, hose, horn or nozzle blockage prevents normal discharge when operated
Corrosion, impact damage or damaged seals compromises the pressure vessel or operating head
Caked powder, degraded foam solution or other medium deterioration reduces discharge effectiveness
Missing safety pin, tamper seal, label or bracket leaves the extinguisher unsecured or not ready for use

Service & Maintenance

Inspect location, accessibility, bracket, safety seal, hose or horn, pressure or weight indication as applicable, corrosion and service status. Confirm the extinguisher type still matches the local fire risk and approved fire plan. Do not discharge solely for routine checking unless the approved procedure requires it. Refer to manufacturer and statutory documentation for the exact figure for charge, inspection and replacement criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Maintain complete approved replacement extinguishers and manufacturer-supported hoses, horns, brackets, pins and seals; recharge and pressure-vessel service should follow certified procedures.
Equipment Model #130404 · ✓ still in production