"> Wilhelmsen Wilhelmsen Water Mist 5kg
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 10 verified suppliers & service companies for Wilhelmsen in the Maritime Network Find suppliers →
Is Wilhelmsen your company? Claim this page
Wilhelmsen

Wilhelmsen Water Mist 5kg

Wilhelmsen Wilhelmsen Water Mist 5kg is identified in the source list as a water mist extinguisher. It is stowed at the approved fire-control position shown on the vessel's fire plan so it can be reached quickly during an incipient fire. Its purpose is to provide immediate portable firefighting capability using the extinguishing medium identified by the unit. The source record provides no additional model-specific operating figure beyond the listed designation and category. Cylinder, valve, hose or horn, extinguishing agent, pressure arrangement and approval markings form a certified portable appliance. The exact extinguisher designation and source-listed agent or mass distinguish capacity and fire-service suitability from neighboring units; refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity kg 5
fire class A,B
marine approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Loss of charge or pressure caused by valve leakage, seal deterioration or damage, resulting in low gauge indication where fitted or insufficient discharge
●Discharge hose, horn or nozzle blockage caused by dirt, corrosion or physical damage, resulting in restricted agent flow
●Cylinder corrosion or mechanical damage caused by marine exposure or impact, resulting in visible deterioration or removal from service
●Operating-pin, handle or valve seizure caused by corrosion or contamination, resulting in inability to activate the extinguisher
●Agent deterioration or compaction caused by age, moisture or poor storage, resulting in reduced discharge performance or failed service inspection

Service & Maintenance

Check the extinguisher is in its assigned location, accessible, correctly secured and visibly undamaged. Inspect cylinder condition, safety pin, seal, hose, nozzle or horn, pressure indication where fitted and service labels. Keep the unit clean and protected from corrosion and do not paint over markings. Weighing, pressure testing, agent replacement and internal servicing must follow the approved service regime. Replace any unit showing leakage, significant corrosion or damaged operating parts. Refer to the manufacturer documentation for the exact figure for service intervals and rejection criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep approved mounting brackets, safety seals, hoses or horns where permitted and replacement complete extinguishers according to the vessel's fire plan. Portable extinguishers are generally maintained through approved servicing rather than extensive onboard internal repair. Use only compatible certified components.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Wilhelmsen?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #130375 · ✓ still in production