"> NAFFCO NAFFCO Water Mist 2kg
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 1 verified suppliers & service companies for NAFFCO in the Maritime Network Find suppliers →
NAFFCO

NAFFCO Water Mist 2kg

NAFFCO NAFFCO Water Mist 2kg is a shipboard unit in the Portable Fire Extinguishers group, classified in the source as Water Mist Extinguisher. It is normally installed at marked fire stations in accommodation, machinery, galley and deck areas according to the vessel fire-control plan. Its primary duty is to provide immediate first-aid firefighting using an extinguishing medium suitable for the local fire risk. In service it interfaces with wall/bracket stowage, inspection tags and the vessel's fire-control plan rather than fixed piping. Compared with neighboring entries in the same product family, this record is the exact NAFFCO NAFFCO Water Mist 2kg variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

capacity kg 2
fire class A,B
marine approved True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Loss of pressure or propellant from valve/seal leakage, typically indicated by gauge or weight check outside the acceptable condition
Corrosion or cylinder damage from marine exposure, typically indicated by pitting, rust or failed inspection
Blocked hose/nozzle from contamination or deterioration, typically indicated by restricted discharge during service testing
Tamper seal, pin or valve damage, typically indicated by extinguisher not ready for immediate use
Extinguishing medium degradation or compaction where applicable, typically indicated by failed service check or poor discharge condition

Service & Maintenance

Check location, accessibility, marking, seal/pin, hose/nozzle, pressure or weight condition as applicable, cylinder corrosion and service date; hydrostatic and internal servicing must follow approved rules and manufacturer instructions.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep approved brackets, seals/pins, hoses/nozzles and replacement units of the required extinguishing medium/type; cylinder refilling and overhaul should be handled by qualified service providers.
Equipment Model #130313 · ✓ still in production