"> Zodiac Marine Zodiac SOLAS 4P
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 12 verified suppliers & service companies for Zodiac Marine in the Maritime Network Find suppliers →
Zodiac Marine

Zodiac SOLAS 4P

Zodiac Marine Zodiac SOLAS 4P is a inflatable life raft in the supplied category 'Life Rafts / Inflatable Life Raft (SOLAS-A)'. It is normally installed at the vessel's designated survival-craft station with its approved launching, securing and embarkation arrangements. It is intended to provide a means of survival and evacuation following abandonment of the vessel. Compared with neighbouring entries in the same series, the supplied list identifies this unit by its model designation; the meaning of any embedded size or rating code should be confirmed in manufacturer documentation. In service it interfaces with its securing arrangement, release or hydrostatic release where applicable, launching appliance where fitted, painter or falls and emergency equipment pack. Model-specific limits, settings, dimensions and acceptance criteria that are not stated in the supplied data should be taken from the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

capacity persons 4

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Container, hull or fabric damage from weathering or impact compromises readiness and is visible during inspection
Release, hook or securing defects can prevent correct launching or create unsafe premature release
Expired, missing or damaged emergency equipment is identified during service or inventory checks
Inflation or pressure loss in inflatable craft may result from valve, cylinder or fabric defects and is found during certified servicing
Corrosion or seizure of fittings and moving parts can hinder launching, steering or recovery

Service & Maintenance

Check stowage, accessibility, markings, securing arrangements, release gear and the condition of external components. Verify service certificates, inspection dates and required onboard checks for the specific survival craft and launching arrangement. Inflation systems, load tests, hooks and structural acceptance criteria must be handled under the applicable statutory and manufacturer procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Onboard spares are generally limited to items approved for shipboard replacement, such as securing parts, lights, batteries, plugs, small fittings and engine-service items for boats; certified raft inflation and fabric repairs are normally handled by an approved service station.
Equipment Model #129457 · ✓ still in production