"> Norsafe / Survitec Norsafe RB-6P
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Norsafe / Survitec

Norsafe RB-6P

Norsafe / Survitec Norsafe RB-6P is identified in the source list as a rescue boat. It is stowed at a designated rescue-boat station and launched by the vessel's approved davit or other certified launching arrangement. Its purpose is to recover persons from the water, assist survival craft and support emergency operations close to the vessel. The source record provides no additional model-specific operating figure beyond the listed designation and category. The boat, engine, steering, lifting points and launching interface form a certified rescue system, so substitutions must preserve the approved arrangement. The exact model designation distinguishes hull size, approved occupancy, propulsion package and launching interface from neighboring rescue-boat variants; refer to the manufacturer documentation for the exact figures.

Norsafe / Survitec Norsafe RB-6P

Components & Design

Component data being added…

Technical Data

capacity persons 6
type Fast Rescue Boat

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Engine starting or fuel-system failure caused by battery, fuel, ignition or maintenance problems, resulting in inability to launch under power or poor acceleration
Steering or control-cable deterioration caused by corrosion, stiffness or mechanical damage, resulting in heavy or unreliable maneuvering
Hull, fender or buoyancy damage caused by impact, weather exposure or poor stowage, resulting in cracks, water ingress or visible deformation
Lifting-point or hook-interface wear caused by repeated drills, corrosion or misalignment, resulting in abnormal play or difficulty connecting the boat to the davit
Electrical, navigation-light or communication-equipment failure caused by battery, wiring or water-ingress problems, resulting in failed readiness checks

Service & Maintenance

Inspect hull condition, engine, fuel system, steering, lifting points, painter arrangements, batteries, lights and required rescue equipment. Run and function-test the engine and controls in accordance with the vessel's approved maintenance plan. Examine lifting eyes, hooks and davit interfaces for corrosion, deformation or abnormal wear. Verify drain plugs, buoyancy spaces and weather covers are correctly secured and that the boat remains ready for rapid launching. Check inventory and identification markings against the approved safety-equipment plan. Refer to the manufacturer and statutory documentation for exact service intervals, load tests and acceptance criteria.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep engine service items, approved fuel-system and ignition consumables, steering-cable or control parts, batteries, lamps and model-specific seals recommended by the manufacturer. Critical hook and lifting components must remain within the certified launching arrangement. Confirm all spare parts against the rescue-boat model, engine identification and approved equipment list.
Equipment Model #129140 · ✓ still in production