"> JRC (Japan Radio Co) BNWAS-100
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
JRC (Japan Radio Co)

BNWAS-100

JRC (Japan Radio Co) BNWAS-100 — Navigation & Bridge Equipment. The supplied category identifies the equipment as Bridge Camera / CCTV, and it is normally installed on the bridge and at monitored deck, machinery or security locations with cameras connected to displays or recording equipment. In that listed role, its primary purpose is to provide visual monitoring and, where fitted, recorded evidence of vessel areas relevant to navigation, security or operations. Bridge CCTV differs from navigation sensors because it provides visual imagery rather than measured navigation data, and its usefulness depends on camera view, lighting, recording and network integrity. Within the supplied list, neighbouring variants are distinguished by their model designations and naming, while the source does not state further model-specific hardware differences. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

type BNWAS
imo compliant True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Camera lens contamination, water ingress or physical damage causes blurred, obscured or missing images
Power, PoE or supply faults cause one or more cameras to go offline
Network, switch or cable faults cause intermittent video, frozen images or lost channels
Recorder or storage faults cause missing historical footage or storage alarms
Incorrect camera alignment, focus or low-light settings leaves critical areas outside the useful field of view

Service & Maintenance

Inspect camera housings, lenses, mounting, cabling, network equipment, displays and recorder status. Confirm each critical view is clear and correctly aligned and review storage or recording alarms. Check time synchronization where recordings may be used operationally or for incident review. Refer to the manufacturer documentation for the exact figure for storage, network and environmental limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry replacement cameras for critical positions where practical, power supplies, network switches or injectors, connectors, storage devices and cleaning materials.
Equipment Model #127641 · ✓ still in production