Radar · Radar & ECDIS
Tokyo Keiki BR-9000 6ft Open is identified in the source list as a marine radar system. The display and controls are normally installed on the bridge, with the radar antenna and transceiver equipment located on the mast or another suitable elevated position. Its purpose is to detect and display surrounding targets and coastline returns to support navigation, collision avoidance and situational awareness. The source record provides the existing record note 'Radar & ECDIS'. A marine radar installation combines antenna, transmitter or solid-state source, receiver, processing, display and navigation-sensor inputs, with the exact architecture depending on the model. The exact model designation and antenna or band information contained in the source distinguish scanner configuration and radar generation from neighboring units; refer to approved manufacturer documentation for the exact figures.
Every value below comes from the manufacturer datasheet or class-society record on file for this model.
Other models of the same equipment type, Tokyo Keiki first.
What our service work and the manufacturer documentation say about keeping this model running.
Inspect antenna rotation, scanner condition, waveguide or cabling, power supplies and bridge connections. Verify heading, speed and position inputs are valid and compare radar presentation with known targets. Check alarms, guard functions and target-tracking behavior using the vessel's approved test procedure. Inspect exposed scanner housings for salt, water ingress and damaged seals and maintain safe RF isolation before work aloft. Back up configuration data where supported and document software or hardware changes. Refer to manufacturer documentation for exact performance tests, transmitter servicing and alignment procedures.
Keep fuses, power-supply modules or approved electronic spares, scanner-drive consumables, seals and interface components recommended for the installed radar. Where the design uses a serviceable transmitter component with a finite life, follow the manufacturer's spare strategy. Ensure replacement modules preserve type approval and software compatibility.
Free of charge — we forward your request to qualified suppliers for Tokyo Keiki equipment from our network of over 114,000 maritime companies.
Tell us what you need for this Tokyo Keiki BR-9000 6ft Open — a part, a service call, a second opinion. Are you Tokyo Keiki? Claim this brand page.
Service engineer? Write the day report for this BR-9000 6ft Open in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →
Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.
Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.
Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.