OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Navigation› Radar & ECDIS› Radar› Sperry Marine VisionMaster FT S-Band 8ft Slotted

VisionMaster FT S-Band 8ft Slotted

Radar · Radar & ECDIS

Class-certified type (DNV register) · technical data sheet not yet verified

Sperry Marine VisionMaster FT S-Band 8ft Slotted is a marine radar system. The display and controls are normally installed on the bridge, with the scanner and associated transceiver equipment mounted on a mast or other elevated position. Its purpose is to detect and display surrounding targets and coastline returns to support navigation, collision avoidance and situational awareness. The installation combines scanner, transmitter or solid-state source, receiver, processing, display and navigation-sensor inputs, with architecture depending on the exact model. Refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Antenna type8ft Slotted
IMO CompliantYes
ArpaYes
Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Inspect scanner rotation, housing condition, waveguide or cabling, power supplies and bridge connections. Verify that heading, speed and position inputs are valid and compare radar presentation with known targets. Check alarms, guard functions and target-tracking behavior using the vessel's approved test procedure. Inspect exposed scanner housings for salt, water ingress and damaged seals and maintain safe radio-frequency isolation before work aloft. Back up configuration data where supported and document approved software or hardware changes. Refer to the manufacturer documentation for the exact figure for performance tests, transmitter servicing and alignment.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Keep fuses, power-supply modules or approved electronic spares, scanner-drive consumables, seals and interface components recommended for the installed radar. Follow the manufacturer's spare strategy for serviceable transmitter components. Ensure replacement modules preserve type approval and software compatibility.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Sperry Marine equipment. Our team checks it and replies by e-mail.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we can check availability and prices faster; without them we may have to ask first, which can cost a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Radar.

Other models of the same equipment type, Sperry Marine first.

By manufacturer FurunoJRCAlphatronRaytheon AnschuetzSperry MarineTokyo KeikiKoden ElectronicsKongsbergSimradWärtsiläKelvin HughesNavico RBU ItaliaRaymarineGEM ElettronicaConsiliumAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Sperry Marine models More like VisionMaster FT S-Band 8ft Slotted
Would you like to know more?

A person reads every request and replies by e-mail.

Tell us what you need for this Sperry Marine VisionMaster FT S-Band 8ft Slotted — a part, a service call, a second opinion. Are you Sperry Marine? Claim this brand page.

Service engineer? Write the day report for this VisionMaster FT S-Band 8ft Slotted in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.