"> JRC (Japan Radio Co) JMA-1032 6ft Open
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Is JRC (Japan Radio Co) your company? Claim this page
JRC (Japan Radio Co)

JMA-1032 6ft Open

JRC (Japan Radio Co) JMA-1032 6ft Open is listed as a marine bridge navigation unit in the Radar & ECDIS / Radar category. Equipment of this class is typically installed on the navigation bridge with scanner, processor, display, and sensor interfaces distributed according to the installation. Its shipboard purpose is to provide radar-derived or electronic-chart navigational information for collision avoidance, route monitoring, and situational awareness. The exact piping, electrical, control, foundation, and accessory arrangement depends on the vessel and the supplied configuration. No additional verified rating, capacity, weight, dimension, or other model-specific figure is supplied in the structured source data. Any differences from adjacent models in the same family, including rating, size, material, control, certification, or accessory differences not explicitly listed here, should be confirmed in the manufacturer documentation.

Components & Design

Component data being added…

Technical Data

frequency band X-Band
antenna type 6ft Open
display size inch 12

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Scanner, transceiver, or antenna-drive faults from component wear, water ingress, or obstruction cause loss of echoes, rotation alarms, or blank presentation
●Display or processor faults from overheating, power problems, or electronic failure cause freezing, rebooting, missing video, or loss of controls
●Poor heading, speed, or position input from interface faults displaces targets, vectors, overlays, or navigation calculations
●Antenna feeder, network, or data-cable defects from corrosion or loose connections produce intermittent targets or sensor dropouts
●Incorrect tuning, gain, clutter, chart data, configuration, or software settings degrade presentation and create inconsistent navigation information

Service & Maintenance

Check power supplies, antenna and scanner condition, bearing and range performance, heading and position inputs, target presentation, alarms, interfaces, cooling, event logs, and approved performance checks. Configuration and alignment work must follow manufacturer, flag, and class requirements.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Typical spares include approved fuses, fans and filters, interface and network components, operator-control items, and scanner or processor service parts according to the vessel maintenance strategy.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for JRC (Japan Radio Co)?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #126715 · ✓ still in production