"> Furuno FEA-2107 24-inch
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 103 verified suppliers & service companies for Furuno in the Maritime Network Find suppliers →
Is Furuno your company? Claim this page
Furuno

FEA-2107 24-inch

Furuno FEA-2107 24-inch is identified in the source list as a electronic chart display and information system. It is installed on the bridge and connected to approved navigation sensors, chart data and the vessel's bridge-network or power arrangements. Its purpose is to display electronic navigational charts together with ship position and other approved navigation information to support route planning and route monitoring. The existing database record provides no additional model-specific operating figure beyond the listed designation and category. The system relies on approved software, chart permits or licenses, sensor interfaces and backup arrangements appropriate to the vessel. The exact model designation identifies the approved hardware, software and interface architecture; capabilities must be confirmed from the system certificate and manufacturer documentation.

Components & Design

Component data being added…

Technical Data

display size 24-inch
imo compliant True
chart format S-57/S-63
backup mode True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Position, heading or speed-input failure caused by sensor or network faults, resulting in missing, frozen or inconsistent own-ship information
●Chart-data or permit problems caused by expired licenses, incomplete updates or corrupted media, resulting in unavailable or outdated chart coverage
●Display or processor failure caused by hardware, power-supply or software faults, resulting in loss of ECDIS presentation
●Alarm or safety-setting misconfiguration caused by incorrect setup or user changes, resulting in excessive, missing or inappropriate route-monitoring alerts
●Network or interface failure caused by damaged cabling, port faults or configuration changes, resulting in loss of connected sensor data

Service & Maintenance

Verify chart updates and permits, backup arrangements and the validity of connected position, heading and speed sources. Check route-monitoring alarms, safety settings and sensor-failure indications using the vessel's approved procedures. Inspect displays, controls, UPS or power supplies and network connections for faults. Back up configuration and route data where permitted before software or hardware maintenance. Confirm that software and chart databases remain within the approved configuration for the vessel. Refer to manufacturer and company documentation for exact update, test and recovery procedures.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep approved backup media or recovery resources, fuses, input devices, selected power-supply or interface modules and other manufacturer-recommended electronic spares. Replacement computers, displays or storage devices must remain compatible with the approved system version. Maintain the required chart and software licensing arrangements.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Furuno?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #126702 · ✓ still in production