"> HiMSEN 12VH46/60
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 6 verified suppliers & service companies for HiMSEN in the Maritime Network Find suppliers →
HiMSEN

12VH46/60

The HiMSEN 12VH46/60 is a 12‑cylinder V‑type, low‑speed (500 rpm) four‑stroke trunk piston main engine delivering about 10.5 MW of power, designed for direct‑drive propulsion on large merchant vessels; source-listed power 10560.0 kW. The supplied category identifies it as Main Engine (4-Stroke Trunk Piston), and it is normally installed in the main engine room as a propulsion prime mover connected directly or through reduction gearing to the propeller or propulsion system. In that role, its primary purpose is to convert fuel energy into mechanical propulsion power using a trunk-piston four-stroke cycle. Compared with a two-stroke crosshead engine, a four-stroke trunk-piston engine combines piston and connecting-rod motion directly at the crankshaft and typically operates at higher rotational speed. Within the supplied list, this entry is distinguished from neighbouring variants by its model designation and the explicitly listed power; no further model-specific difference is stated in the source. No additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

HiMSEN 12VH46/60
10560.0 kW
Power

Engine Specifications

12
Cylinders
460 mm
Bore
600 mm
Stroke
4-stroke
Stroke Type

Components & Design

Component data being added…

Technical Data

power kw 10560
rpm 500
fuel type HFO/MDO
configuration V

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Fuel-injection faults cause smoke, cylinder imbalance, hard starting or abnormal exhaust temperature
Lubrication or bearing deterioration causes low oil pressure, metal debris, rising temperature or abnormal noise
Cooling-system fouling or leakage causes high jacket-water temperature and reduced thermal margin
Turbocharger, charge-air cooler or intake fouling causes low air supply, smoke and high exhaust temperature
Valve-train, valve-seat or timing faults cause compression loss, poor combustion or mechanical noise

Service & Maintenance

Trend oil pressure, coolant temperature, exhaust temperatures, load balance, vibration and crankcase condition. Inspect fuel equipment, filters, coolers, valves, turbocharger, mounts and safety shutdowns according to the maintenance plan. Investigate persistent cylinder imbalance, oil debris or coolant leakage promptly. Refer to the manufacturer documentation for the exact figure for valve, bearing, injection and wear limits.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry fuel and oil filters, injector service parts, valve-train and gasket items, cooling-system seals, sensors, belts where fitted and critical bearing or turbocharger consumables.
Equipment Model #124235 · ✓ still in production