OceanSphereENGINES

10LW46TS-DF

Main Engine 4-Stroke · Main Engines (4-Stroke)

​‌⁠‍​‌​⁠⁠‍‌‌‍‍‍​‌‍⁠⁠
6,700 kWPower
10Cylinders
460 mmBore
580 mmStroke

The Wärtsilä 10LW46TS-DF is a 10‑cylinder, medium‑speed (600 rpm) dual‑fuel main engine delivering up to 6 700 kW, notable for its high thermal efficiency (up to 52% in gas mode), fast two‑minute start‑up and IMO Tier III emissions compliance without after‑treatment.

Specifications

Technical data.reference — unverified

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Thermischer Wirkungsgrad (BTE)46TS-DF: bis 52% (Gasmode); 46TS-SG: 51,3% (Spark-Ignited)
Leistungsdichte1.300 kW pro Zylinder, ohne Größenerhöhung zu Vorgänger
TurboladerZweistufiges Turboladersystem mit hochelektronischer Common-Rail-Einspritzung
AbgasemissionenIMO Tier III konform (Gasmode ohne Abgasnachbehandlung); Methanschlupf 20% unter Marktbenchmark; Niedrigste CO₂-Emissionen im Segment
Hochfahrzeit2 Minuten (46TS-SG, keine Min/Max-Betriebzeitanforderungen)
Temperaturbereich-55°C bis +55°C Vollastbereich
Motorgewicht (46TS-SG)359-381 Tonnen (je nach Zylinderkonfiguration)
Dimensions-Länge (46TS-SG)18.902-19.952 mm
Dimensions-Höhe (46TS-SG)5.891 mm
Dimensions-Tiefe (46TS-SG)6.688 mm
Power (kW)6700
Speed (rpm)600
Fuel TypeLNG/HFO (Dual-Fuel)
ConfigurationL
Inspection

Inspector Detail

Common issues

  • Cylinder liner bore wear/polishing increasing lube oil consumption
  • Piston ring wear or sticking affecting blow-by and gas-mode knock margin
  • Gas admission valve fouling or leakage in dual-fuel mode
  • Turbocharger fouling reducing charge air pressure and available power
  • Exhaust valve seat burning or recession
  • Fuel injector wear or dribbling in liquid-fuel (backup) mode
  • Charge air cooler fouling reducing charge air density
  • Knock/combustion control drift causing derating in gas mode

Inspection checklist

  • Cylinder liner bore gauging and borescope inspection
  • Piston ring free gap and groove wear check at overhaul
  • Exhaust valve seat recession and rotator function check
  • Turbocharger bearing clearance and compressor/turbine fouling inspection
  • Gas admission valve leak test and function check
  • Fuel injector spray pattern and opening pressure test
  • Crankshaft deflection readings
  • Charge air cooler cleanliness and pressure drop check
  • Main and big-end bearing shell inspection at overhaul
  • Per-cylinder combustion/knock-margin data review

Service intervals

Cylinder head/valve inspectiontypically every 4000-8000 running hours - confirm against Wärtsilä's W46 maintenance schedule for this variant
Piston/liner overhaultypically in the 16000-24000 hour range - confirm against the maker's manual for the 10LW46TS-DF
Turbocharger overhaultypically 8000-16000 hours depending on turbocharger type fitted
Lube oil analysisevery 500 hours or per class recommendation
Crankshaft deflection checkannually or per class survey requirement
Fuel injector service (liquid-fuel mode)typically 4000-8000 hours

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Cylinder liner bore wearcommonly quoted as roughly 0.3-0.4% of bore diameter as a general renewal allowance for medium-speed trunk piston engines - confirm the exact figure against the Wärtsilä W46 instruction manual
Piston ring end gapinstalled gap scales with bore diameter, typically on the order of 0.3-0.6 mm per 100 mm of bore, larger at the wear limit - confirm against maker's tables for this bore
Main bearing clearancetypically in the 0.2-0.4 mm range for this journal size class - confirm against Wärtsilä's instruction manual for the 10LW46TS-DF

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Cylinder liner and piston ring set
  • Exhaust and inlet valves with seats
  • Fuel injector/injection valve (liquid-fuel mode)
  • Gas admission valve components (dual-fuel system)
  • Main and big-end bearing shells
  • Turbocharger repair/cartridge kit

Safety

  • Gas fuel system integrity - leak detection, ventilation and double-wall piping are critical to prevent explosive gas accumulation in the engine room
  • Crankcase explosion risk - the oil mist detector must remain in service and must never be bypassed
  • High-pressure fuel and gas injection systems must be depressurized before maintenance
  • Hot surfaces on exhaust manifold and turbocharger
  • Turning gear/flywheel rotating parts during barring

Class survey

Falls under Continuous Survey Machinery (CSM) for most societies; surveyors expect crankshaft deflection records, cylinder condition reports, turbocharger overhaul records, and evidence of gas fuel system integrity checks (double-wall piping, ventilation, gas detection) supporting the vessel's dual-fuel/IGF Code notation.

Estimated lifetime: Major running gear (liners, pistons) typically runs 16000-24000 hours between overhauls on this platform, with total engine service life commonly extending well beyond 100000 hours across several overhaul cycles when maintained to the maker's schedule - confirm against Wärtsilä's own lifetime guidance for the W46TS-DF.

Need this part?

Request a quote for this model.

Free of charge — send us your request for Wärtsilä equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Main Engine 4-Stroke.

Other models of the same equipment type, Wärtsilä first.

By manufacturer MAN Energy SolutionsWärtsiläCaterpillarHiMSENMTUVolvo PentaYanmar Power Technology Co., Ltd.HanshinDaihatsuPielstickMaK (Caterpillar)Rolls-Royce / BergenCaterpillar MaKCumminsBaudouinAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Wärtsilä models More like 10LW46TS-DF
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Wärtsilä 10LW46TS-DF — a part, a service call, a second opinion. Are you Wärtsilä? Claim this brand page.

Service engineer? Write the day report for this 10LW46TS-DF in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.