OceanSphereENGINES

8LW38B

Main Engine 4-Stroke · Main Engines (4-Stroke)

​‌⁠‍​‌​‌‍⁠⁠‍‍​⁠​​‍‍‌
4,160 kWPower
8Cylinders
380 mmBore
475 mmStroke

The Wärtsilä 8LW38B is an eight‑cylinder, medium‑speed (600 rpm) four‑stroke trunk piston diesel engine delivering about 4 160 kW, primarily used as a main propulsion unit on mid‑size merchant vessels.

Specifications

Technical data.

Do you have the manufacturer datasheet for this model? Send it with the enquiry form — we check it and name the source.

Power (kW)4160
Speed (rpm)600
Fuel TypeHFO/MDO
ConfigurationL
Inspection

Inspector Detail

Common issues

  • Cylinder liner wear/bore polishing from insufficient lube oil feed rate or an unsuitable ring pack
  • Turbocharger bearing wear or fouling, causing increased exhaust temperature and reduced boost
  • Fuel injector nozzle coking, causing white smoke, misfire or exhaust temperature deviation between cylinders
  • Piston ring sticking or breakage from carbon buildup, especially on HFO operation
  • Charge air cooler fouling, reducing charge air density and increasing thermal load
  • Camshaft/roller follower wear on the valve gear
  • Exhaust valve seat/spindle cracking from thermal fatigue
  • Crankcase lube oil contamination with water via a cooler leak or condensation

Inspection checklist

  • Check exhaust gas temperature deviation between cylinders; a spread over roughly 50 C points to injector or valve trouble
  • Measure and record turbocharger speed and boost pressure against the trend/reference curve
  • Borescope the cylinder liner bore for scuffing, polishing or micro-seizure marks
  • Check piston ring gap and ring groove wear against the maker's tolerance at overhaul
  • Test fuel injector opening pressure and spray pattern on the bench at the scheduled interval
  • Check crankshaft deflection readings against the maker's limits
  • Inspect the turbocharger for fouling and check bearing clearance and axial play
  • Verify safety trips (overspeed, low LO pressure, high jacket water temperature) function correctly
  • Check main and big-end bearing clearances at scheduled overhaul
  • Inspect the charge air cooler for fouling/leakage and check air-side pressure drop

Service intervals

Fuel injector overhaul/testingtypically every 4000-8000 running hours, per the maker's manual
Turbocharger overhaultypically every 12000-16000 running hours
Cylinder head/valve inspectiontypically every 8000-12000 running hours
Crankcase oil analysismonthly, with oil/filter service per condition or the maker's TBO
Main/big-end bearing inspectiontypically every 16000-24000 running hours or condition-based
Crankshaft deflection checkevery 6-12 months or after major overhaul

Typical intervals for this design class, not the manufacturer’s figures for your model. The manufacturer’s manual is binding.

Typical wear limits

Piston ring gaptypically 0.8-1.5 mm for this bore class - confirm against the engine's own manual
Cylinder liner bore wear (diametral)typically condemn around 0.3-0.5 mm per 100 mm bore diameter increase - confirm against the maker's limit table
Main bearing clearancetypically 0.20-0.40 mm depending on shell design - confirm against the maker's specification
Big-end bearing clearancetypically 0.15-0.35 mm - confirm against the maker's specification

Ranges are typical for this design class. Always confirm against the manufacturer documentation for your serial number.

Critical spares

  • Fuel injector, complete assembly, ordered by engine type
  • Piston ring set per cylinder
  • Cylinder liner
  • Turbocharger repair kit (bearings, seals)
  • Main and big-end bearing shells
  • Cylinder head gasket set
  • Exhaust valve and seat

Safety

  • Crankcase explosion risk from oil mist and hot spots - allow a cool-down period after a hot bearing alarm before opening crankcase doors
  • High-pressure fuel injection - depressurize before disconnecting lines; injected fuel can penetrate skin
  • Hot exhaust manifold and turbocharger casing surfaces
  • Rotating flywheel/coupling - engage the turning gear interlock before internal work
  • Starting air system stored pressure - isolate and bleed before working on the start air distributor

Class survey

Medium-speed trunk piston main engines of this size are typically under Continuous Machinery Survey or an approved planned maintenance scheme; class expects current crankshaft deflection records, bearing clearance history and governor/overspeed trip test records at survey.

Estimated lifetime: Top-end overhaul typically due around 16000-24000 hours; engines of this class commonly reach well over 100000 hours to major renewal with proper maintenance - fuel quality and load profile change this significantly, confirm against the maker's TBO schedule

Need this part?

Request a quote for this model.

Free of charge — send us your request for Wärtsilä equipment. Our team checks it and replies by e-mail.

For marine equipment hardly any maker or authorised dealer will name a price while the vessel is unknown. With the vessel details, availability and price can be settled faster; without them we may have to ask first, which costs a few days. If you are not allowed to name the vessel, a photo of the rating plate is enough — attach it below or send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
Related models

Also in Main Engine 4-Stroke.

Other models of the same equipment type, Wärtsilä first.

By manufacturer MAN Energy SolutionsWärtsiläCaterpillarHiMSENMTUVolvo PentaYanmar Power Technology Co., Ltd.HanshinDaihatsuPielstickMaK (Caterpillar)Rolls-Royce / BergenCaterpillar MaKCumminsBaudouinAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Wärtsilä models More like 8LW38B
More than the data sheet shows

We answer by e-mail, never with an automatic reply.

Tell us what you need for this Wärtsilä 8LW38B — a part, a service call, a second opinion. Are you Wärtsilä? Claim this brand page.

Service engineer? Write the day report for this 8LW38B in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Questions that come up with this equipment.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — a person reads every request and replies by e-mail.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.