"> Wärtsilä 6LW25
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 66 verified suppliers & service companies for Wärtsilä in the Maritime Network Find suppliers →
Wärtsilä

6LW25

The Wärtsilä 6LW25 is a medium‑speed, four‑stroke trunk piston main engine delivering around 1.0–2.1 MW (depending on fuel mode) at 900–1000 rpm, notable for its multi‑fuel capability (HFO/MDO, LNG, ammonia).

Wärtsilä 6LW25
1050.0 kW
Power

Engine Specifications

6
Cylinders
250 mm
Bore
300 mm
Stroke
4-stroke
Stroke Type

Components & Design

Component data being added…

Technical Data

Bohrung x Hub 250 x 350 mm
Zylinderkonfigurationen 6L, 7L, 8L, 9L
Drehzahl 900 or 1000 rpm
Leistung Diesel 2,0-3,4 MW
Leistung Dual-Fuel (LNG/NH3) 1,9-3,1 MW
Leistung pro Zylinder @ 900 rpm (NH3) 315 kW/Zyl.
Leistung pro Zylinder @ 1000 rpm (NH3) 345 kW/Zyl.
TBO (Time Between Overhaul) up to 32,000 hours
IMO Tier III nativ in LNG-Mode; mit NOR in Diesel/NH3-Mode
Brennstoff-Injektionssystem Common-Rail Hochdruck-Einspritzung
power kw 1050
rpm 1000
fuel type HFO/MDO
configuration L

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

High-pressure common rail pump wear from contamination

Inspect fuel pressure curves; regularly check high-pressure lines for leaks; fuel analysis (water path, particle path)

Piston ring wear and sump contamination during continuous slow steaming (low-load operation)

Monitor crankcase ventilation; check sump oil analysis (iron Fe, chromium Cr, base number BN); piston ring wear during regular sump inspection

Turbocharger fouling and power loss due to deposits on turbine/compressor blades

Monitor turbocharger pressure ratio and exhaust gas temperatures; check scavenge air temperature after charger; periodic ultrasonic inspection or borescope if suspected

NOx reduction system (NOR/SCR) - urea metering valve and catalyst wear

Inspect urea inventory and metering system; check SCR catalyst for wear/fouling; exhaust gas testing per IMO Tier III standards

Type-general inspection and maintenance points for this equipment category — not model-specific.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →
Equipment Model #123079 · ✓ still in production