"> Rieber Marine Dishwasher Medium 400V Marine
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Rieber Marine in the Maritime Network Find suppliers →
Rieber Marine

Dishwasher Medium 400V Marine

Rieber Marine Dishwasher Medium 400V Marine is listed in the source as a marine Dishwasher within the Galley & Domestic group. Equipment of this type is typically installed in the ship's galley or catering area with the required ventilation, drainage and utility connections. Its primary duty is food preparation or cleaning duties associated with the Dishwasher, and it uses electrical or fuel heating, water, pumps, controls and safety devices according to the appliance type. The supplied entry records rated power 10.0 kW; these stated values should be retained when the unit is identified or compared with neighboring variants. It normally interfaces with ship electrical or gas supply as fitted, ventilation, water and drainage connections and local safety cut-outs. For any exact capacity, pressure, voltage, tolerance, wear limit or setting not stated in the source, refer to the manufacturer documentation for the exact figure.

10.0 kW
Power

Components & Design

Component data being added…

Technical Data

power kw 10
capacity standard
fuel electric

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Heating-element, burner or thermostat faults caused by ageing, contamination or control failure can result in slow heating, overheating or failure to reach operating condition
Door, seal or gasket deterioration caused by heat and repeated use can cause heat loss, steam leakage or poor washing performance
Drain, spray or filter blockage caused by food debris or scale can produce poor cleaning, standing water or overflow
Switch, contactor or control-board faults caused by moisture or component wear can lead to intermittent operation or failure to start
Ventilation or cooling obstruction caused by grease or dust can increase appliance temperature and cause nuisance trips or component damage

Service & Maintenance

Inspect cleanliness, guards, wiring, controls, seals, drains, ventilation and utility connections. Confirm safety cut-outs and protective devices operate without bypassing them, and remove grease or scale according to the maker's procedure. Refer to manufacturer documentation for exact electrical, gas, temperature and service values.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Useful spares include seals, heating or control components, filters, switches, contactors, fuses, spray or drain parts and other maker-approved consumables suited to the appliance.
Equipment Model #122016 · ✓ still in production