"> Glamox AQL LED Marine Floodlight
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 2 verified suppliers & service companies for Glamox in the Maritime Network Find suppliers →
Glamox

AQL LED Marine Floodlight

The Glamox AQL LED Marine Floodlight is a high‑efficiency, 0.4 kW LED floodlight designed for deck and work‑area illumination on ships, featuring a sealed marine‑grade housing and an expected service life of about 50,000 hours. The supplied category identifies the equipment as Floodlights & Deck Lights, and it is normally installed in accommodation, machinery, deck or hazardous spaces according to the vessel lighting plan and the fitting's approved enclosure. In that listed role, its primary purpose is to provide fixed, emergency, navigation or work illumination according to the listed type. LED, floodlight, emergency and explosion-protected fittings differ in optics, supply and enclosure requirements, so replacement components must match the approved fitting. The model designation identifies the listed configuration, but no additional performance, approval or construction detail is inferred from the model code beyond the information supplied in the source record. The source metadata also states capacity: 50-400W LED (6000-50000 lm). For exact ratings, dimensions, settings, capacities, materials and variant-specific limits, refer to the manufacturer documentation for the exact figure.

0.4 kW
Power
50-400W LED (6000-50000 lm)
Capacity
Ship Lighting
Medium

Components & Design

Component data being added…

Technical Data

power kw 0.4
type LED Marine Floodlight

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

Lamp, LED module or driver failure causes complete loss of light, reduced output or flicker
Water ingress through damaged seals or glands causes corrosion, intermittent operation or earth faults
Heat buildup or failed thermal management causes reduced output, discoloration or early electronic failure
Loose terminals or degraded cabling causes flicker, local overheating or loss of supply
Lens contamination, yellowing or mechanical damage reduces useful illumination and can compromise the enclosure

Service & Maintenance

Inspect housing, lens, seals, cable glands, mounting, terminals and signs of overheating or moisture. Verify correct operation from normal and emergency supplies where applicable. Maintain hazardous-area or weatherproof enclosure integrity and keep optical surfaces clean. Refer to the manufacturer documentation for the exact figure for electrical and enclosure requirements.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Carry complete replacement fittings or approved lamp, LED and driver modules, seals, cable glands, fuses, terminal parts and mounting hardware.
Equipment Model #1210 · ✓ still in production