"> IPSO Marine IY135 440V Marine
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
🔧 14 verified suppliers & service companies for IPSO Marine in the Maritime Network Find suppliers →
Is IPSO Marine your company? Claim this page
IPSO Marine

IY135 440V Marine

IPSO Marine IY135 440V Marine is identified in the source list as a marine tumble dryer. It is normally installed in the vessel's laundry, accommodation service area or other designated domestic machinery space. Its purpose is to dry washed textiles using controlled airflow and heat. The existing database record states 20.0 kW. Marine installation requires secure mounting, suitable electrical supply, ventilation or drainage and protection against ship motion and vibration. The exact model designation distinguishes drum size, heating or washing configuration and control package; capacity and electrical requirements must be confirmed from the nameplate and manufacturer documentation.

20.0 kW
Power

Components & Design

Component data being added…

Technical Data

capacity kg 100
drum volume l 1200
power kw 20.0
water consumption l 0
spin speed rpm 0

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Restricted airflow caused by lint buildup, blocked filters or ducting, resulting in long drying cycles, overheating or protective trips
●Heater or temperature-control failure caused by element, sensor or control faults, resulting in no heat, overheating or aborted cycles
●Drive-belt, motor or bearing deterioration caused by wear, overloading or misalignment, resulting in noise, poor drum rotation or stoppage
●Electrical-control faults caused by moisture, loose connections or component failure, resulting in intermittent operation, alarms or breaker trips
●Door seal, hose or connection leakage caused by wear or loosening, resulting in water, condensate or air leakage around the machine

Service & Maintenance

Clean lint filters and inspect exhaust or condenser airflow paths frequently. Inspect drum supports, bearings, drive components, door seals and electrical connections for wear or overheating. Verify safety interlocks and emergency stop functions where fitted. Keep the machine securely fastened to its marine foundation and inspect anti-vibration mounts. Investigate repeated trips rather than resetting the machine without identifying the cause. Refer to the manufacturer documentation for exact servicing intervals and electrical checks.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep door seals, drive belts where fitted, filters, selected valves or pumps, fuses and manufacturer-recommended control or sensor components. For passenger or hotel-service vessels, additional wear items may be justified because of high utilization. Confirm exact spares from the model and serial number.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for IPSO Marine?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #114239 · ✓ still in production