"> Heinen & Hopman AHU-HH-R 30000m3h H13
OceanSphere
Engines
⚓ Working on this equipment?
Ask the AI troubleshooter, log your hours on board and turn them into invoice-ready service reports — for this exact model.
Start free — 14 days →
No credit card required
Is Heinen & Hopman your company? Claim this page
Heinen & Hopman

AHU-HH-R 30000m3h H13

Heinen & Hopman AHU-HH-R 30000m3h H13 is a shipboard unit in the Air Handling Units group, classified in the source as Air Handling Unit (AHU). It is normally installed in accommodation HVAC rooms, fan rooms or technical spaces serving one or more ventilation zones. Its primary duty is to filter, heat or cool and distribute conditioned air through the vessel's ducting system. In service it interfaces with chilled or hot water coils, air ducts, dampers, filters, fans, condensate drains, electrical controls and the HVAC automation system. Compared with neighboring entries in the same product family, this record is the exact Heinen & Hopman AHU-HH-R 30000m3h H13 variant; the model designation should be retained unchanged when matching onboard documentation and spares. For exact limits, settings, test values and approved maintenance criteria, refer to the manufacturer documentation for the exact figure.

Components & Design

Component data being added…

Technical Data

air flow m3h 30000
cooling capacity kw 300.0
heating capacity kw 240.0
filter class H13
heat recovery True

🤖 Ask about this model

One free question — answered like a marine engineer. No account needed.

Common failures & inspection points

●Filter blockage from dust and salt contamination, typically indicated by reduced airflow, increased differential pressure or poor room ventilation
●Fan or bearing deterioration from wear, imbalance or contamination, typically indicated by vibration, noise, overheating or reduced airflow
●Coil fouling, corrosion or leakage from contaminated air or poor water quality, typically indicated by loss of heating/cooling duty, water leakage or reduced heat transfer
●Condensate drain blockage from dirt or biological growth, typically indicated by water carry-over, tray overflow or local leakage
●Damper or actuator malfunction from mechanical binding or control faults, typically indicated by incorrect airflow balance, temperature complaints or failed fire/smoke response

Service & Maintenance

Inspect filters, fan impeller and bearings, drive components where fitted, coils, drain trays, condensate traps, dampers, actuators and control sensors; confirm clean airflow paths and correct fire-damper interfaces.

Suppliers & Spare Parts

Direct links to manufacturer, datasheet, spare-parts portal and dealers — request access below.

📄 Request sourcing links & documents
🛠 Manage this equipment in your fleet

Cases, daily reports, timesheets and AI troubleshooting in the OceanSphere Marine app — free for 14 days.

Start free trial →
🔎 Suppliers & service for this equipment

Find manufacturers, repair shops and spare-part dealers in the Maritime Network — our global company directory.

Maritime Network →

Replacement Parts

Keep filter elements, belts where fitted, bearings or fan service kits, actuator spares, sensors, drain-trap components and coil gaskets appropriate to the installed unit.
Working on this unit?
Log hours, photos and findings into an invoice-ready service report — OceanSphere Marine, 14-day free trial.
Need a service partner for Heinen & Hopman?
114,000+ shipyards, suppliers and service companies in the Maritime Network directory.
Equipment Model #113709 · ✓ still in production