OceanSphereFree accountLog inDEENPL
OceanSphereENGINES
Library› Cargo› Cargo Level & Temperature Gauging› Pressure/DP Transmitter› Yokogawa EJX310A Absolute 5m Ex ia Marine

EJX310A Absolute 5m Ex ia Marine

Pressure/DP Transmitter · Cargo Level & Temperature Gauging

Class-certified type (DNV register) · technical data sheet not yet verified

Yokogawa EJX310A Absolute 5m Ex ia Marine is listed as a Pressure/DP Transmitter within the Cargo Level & Temperature Gauging category. It is typically installed on cargo or ballast tanks, with sensors mounted at the tank, deck or instrument piping and signals routed to cargo-control or automation systems. Its engineering role is to measure level, pressure, differential pressure or related tank condition for safe cargo and ballast operations. The complete model designation should be retained when matching drawings, certificates, service information and spare parts because neighboring variants may differ in configuration even when they share the same equipment family. The exact shipboard arrangement and interfaces remain installation-specific and should be checked against the vessel’s approved drawings and equipment documentation. Where an operating value, tolerance, wear limit or setting is not explicitly stated in the source data, refer to the manufacturer documentation for the exact figure.

Specifications

Technical data.reference — unverified

Every value below comes from the manufacturer datasheet or class-society record on file for this model.

Measuring Range (m)5
Accuracy (mm)3.0
ATEX ZoneEx ia
Output4-20mA HART
Related models

Also in Pressure/DP Transmitter.

Other models of the same equipment type, Yokogawa first.

Service

Service notes.

What our service work and the manufacturer documentation say about keeping this model running.

Service notes

Compare readings with independent references where available, inspect sensor surfaces or impulse lines, verify cabling and review calibration status. Check alarm and remote-indication functions through the cargo-control system. Calibration tolerances and test points must follow the manufacturer documentation and vessel cargo procedures.

Inspection

Common failures & inspection points

Spares

Replacement Parts

Spare parts notes

Useful spares include compatible sensors or transmitter modules, seals, impulse-line fittings, cable glands, fuses and manufacturer-recommended electronic interface parts.

Need this part?

Request a quote for this model.

Free of charge — we forward your request to qualified suppliers for Yokogawa equipment from our network of over 114,000 maritime companies.

Makers and authorised dealers rarely quote marine equipment without the vessel. With these details we usually come back with prices; without them we have to ask first, which costs a few days. If you cannot share the vessel, a photo of the equipment’s rating plate does the same job — send it as a reply to our confirmation e-mail.

Your contact details are not published. No account required.
By manufacturer AFRISOWISKASwagelokEndress+HauserAlfa Laval S.p.A.MAN Energy SolutionsWärtsiläABB MarineAlfa LavalMacGregorNovenco MarineseimihanlaimsDESMICarrier MarineAll manufacturersSpare parts by equipmentNew here? Create a free account Can't read the plate? Try the nameplate scanner All Yokogawa models More like EJX310A Absolute 5m Ex ia Marine
Would you like to know more?

One person answers within 24 hours on working days.

Tell us what you need for this Yokogawa EJX310A Absolute 5m Ex ia Marine — a part, a service call, a second opinion. Are you Yokogawa? Claim this brand page.

Service engineer? Write the day report for this EJX310A Absolute 5m Ex ia Marine in OceanSphere Work — photos, hours and parts, as a PDF for the owner. Try it free for 14 days →

Frequently asked

Three things people ask first.

Is this model's data free?

Yes. Specifications, documents and service notes for this model are readable without an account. An account adds saved searches and requests, nothing is taken away.

Can you find a part for this exact model?

Yes. Tell us the manufacturer, the model and what you need — our desk asks the right suppliers from a network of over 114,000 companies and comes back with a quote or a sourcing plan.

The specifications look wrong — what now?

Send us the nameplate or the correct value. We check it against the manufacturer datasheet or class-society record and update the page.